null

SAME DAY SHIPPING on orders placed before 3PM EST

Svantek SV104IS Dosimeter W/Unit/Mic/Rechargeable Batteries

Selected Product Quantity is not available.

Selected Product Quantity is not available.

SKU:
SV104IS

BRAND:

(No reviews yet) Write a Review

Usually ships in 2-4 days

$3,247.92
$2,873.75
(You save $374.17 )
/EA
Dosimeter,Svantek W/Unit/Mic/Rechargeable Batteries
  • The SV 1041S is the INTRINSICALLY SAFE personal noise dosimeter in accordance to ATEX directive and IECEx certification scheme.
  • The dosimeter has been designed to meet requirements of the ANSI S1 .25 and IEC 61252 standards for noise dosimeters and the IEC 61672 standard for class 2 sound level meters.
  • The colour graphical display is an OLED SCREEN with a high contrast visibility even in full daylight or in low ambient light areas.
  • The SV104IS is FULLY CONFIGURABLE in Supervisor software. Settings such as exchange rate, time constants, measurement time, start, stop or pause can be adjusted and saved in the instruments' memory as setup files.
  • The TIME HISTORY LOGGING of results such as Leq, Max, Min and Peak with two simultaneous logging steps is saved in internal memory. All dosimetry results such as DOSE, TWA, Lav are also included.
  • The dosimeter is suitable for noise exposure measurements in accordance to the ISO 9612 as well as OSHA, MSHA and ACGIH standards.
  • The MEMS MICROPHONE is resistant to mechanical shocks and accidental drop­downs. Additionally it provides for an excellent stability of measurement parameters over the years of use.
  • The AUTO-CALIBRATION facility detects a calibration signal and automatically starts the calibration process, saving the calibration data together with the measurement file, both before and after measurement.
  • The inbuilt tri-axial VIBRATION SENSOR detects shocks and vibrations that influence noise measurement results and provides the information on the time when dosimeter is not used by the worker.
  • The VOICE ANNOTATIONS before or after the measurements allow easy identification of data files.
Step:
1