Use with 3M™Respirators 5000, 6000, 7000 and FF-400 Series, according to NIOSH approvals. When properly selected, cartridges and filters help provide protection from a variety of gases, vapors and particulate hazards. Available with 3M™Service Life Indicator, an end-of-service-life indicator (ESLI) that can help users determine when to change cartridges in appropriate environments.
- Nuisance level organic vapors refer to concentrations less than the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against organic vapors.
- Nuisance level acid gases refer to concentrations less than the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Do not use for respiratory protection against acid gases.
- 3M™recommended for ozone protection up to 10 x OSHA PEL or applicable government occupational exposure limits, whichever is lower. Not NIOSH approved for use against ozone.
- OSHA regulations require gas proof goggles be worn with half facepiece respirators when used against formaldehyde.
- Only 3M™filters 2000 Series, 7093, 5N11 or 5P71 are approved for use with 3M™5000 Series Respirators. Cartridges on 5000 Series Respirators cannot be replaced. The 3M™Filter Adapter 502 is required for use of the 2000 Series and 7093 filters with the 5000 Series Respirators and 6000 Series Cartridges. The 3M™Filter Retainer 501 is required for use of the 5N11 and 5P71 prefilters with the 5000 Series Respirators. The 502 adapter cannot be reused.
- Short Description - 3M™ Replacement Cartridges, Filters, and Accessories
2524, 2521, 2526, 2515, 2527, 2522, 2529, 2530, 2531, 2532