BW Technologies Replacement Sensor, ToxiPro™, Detects: Sulfur Dioxide, 0 to 100 ppm Sensor, 0.1 ppm Resolution, For Use With: ToxiPro™ Single-Gas Detectors
- Operates with or without a controller
- Direct digital readout with OLED cold temperature display
- 4 to 20 mA and digital Modbus outputs standard
- 2 fully programmable alarm relays and fail relay
- Non-intrusive calibration via magnetic wand
- Explosion proof construction
- Patented water repellent sensor cover
- User friendly setup, push buttons and OLED menus
- Long life sensors (2+ years typical)
- Item Name - Replacement Sensor
- Series - ToxiPro™
- Suitable For Use With - ToxiPro™ Single-Gas Detectors
- Resolution - 0.1
- Detects - Sulfur Dioxide
- Sensor Range - 0 to 100
- Marketing Description - The RKI M2A™ is a state-of-the-art transmitter that can operate as an independent, stand alone monitor or as part of an integrated system. The M2A™ connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A™ provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging. The housing of the M2A™ does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics. The transmitter provides a 4 to 20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window. The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, SO2, PH3, AsH3, and HCN. The M2A™ represents the latest leading edge technology in sensor/transmitters today.